Department of Mechanical Engineering
Room E1-386 EITC
University of Manitoba (Fort Garry campus)
Winnipeg, MB R3T 5V6
Product Design and Manufacturing.
Digital manufacturing, Design method, Product assembly/disassembly planning,
System modeling and simulation, CAD/CAM system, Virtual reality.
Professor Qingjin does not have any graduate student opportunities available at this time.
Hamid Reza Fazeli, Qingjin Peng (2022), Generation and Evaluation of Product Concepts by Integrating Extended Axiomatic Design, Quality Function Deployment and Design Structure Matrix, Advanced Engineering Informatics. 54, 101716. https://doi.org/10.1016/j.aei.2022.101716.
Yanlin Shi, Qingjin Peng (2022), Conceptual design of product structures based on WordNet hierarchy and association relation, Journal of Intelligent Manufacturing, https://doi.org/10.1007/s10845-022-01946-9.
Zohreh Sohrabi Ghareh Tappeh, Qingjin Peng (2022), Efficient Bolus Shaping for Cancer Care, Computer-Aided Design & Applications, 19(3), 587-601, https://doi.org/10.14733/cadaps.2022.587-601.
Hamid Reza Fazeli, Qingjin Peng (2021), Integrated Approaches of BWM-QFD and FUCOM-QFD for Improving Weighting Solution of Design Matrix, Journal of Intelligent Manufacturing, 1-18, https://doi.org/10.1007/s10845-021-01832-w
Rui Li, Qingjin Peng (2021), Deep learning-based optimal segmentation of 3D printed product for surface quality improvement and support structure reduction, Journal of Manufacturing Systems, 60, 252-264. https://doi.org/10.1016/j.jmsy.2021.06.007
Yanlin Shi, Qingjin Peng (2021), Enhanced customer requirement classification for product design using big data and improved Kano model, Advanced Engineering Informatics, 49, 101340. https://doi.org/10.1016/j.aei.2021.101340
Heng Zhang, Qingjin Peng, Jian Zhang, Peihua Gu (2021), Planning for automatic product assembly using reinforcement learning, Computers in Industry, 130, 103471. https://doi.org/10.1016/j.compind.2021.103471
Hamid Reza Fazeli, Qingjin Peng (2021), Estimation of Spatial-Temporal Hand Motion Parameters in Rehabilitation Using a Low-cost Noncontact Measurement System, Medical Engineering and Physics, 90:43-53, https://doi.org/10.1016/j.medengphy.2021.02.005.
Yanlin Shi, Qingjin Peng (2021) Definition of customer requirements in big data using word vectors and affinity propagation clustering, Proc IMechE Part E: Journal of Process Mechanical Engineering, 235(5), 1–13, https://doi.org/10.1177/09544089211001776.
Rui Li, Xihui Liang, Qingjin Peng (2021) A selection strategy for Kriging based design of experiments by spectral clustering and learning function. ASCE-ASME Journal of Risk and Uncertainty in Engineering Systems, RISK-20-1049, https://doi.org/10.1115/1.4050160.
Rui Li, Qingjin Peng, Harry Ingleby, David Sasaki (2021), Improved bolus shaping accuracy using the surface segmentation and spectral clustering, International Journal of Modelling and Simulation, 41:4, 299-310, https://doi.org/10.1080/02286203.2020.1756036.
Marwan Khalid, Qingjin Peng (2021), Investigation of Printing Parameters of Additive Manufacturing Process for Sustainability Using Design of Experiments, ASME Journal of Mechanical Design, March, Vol. 143 / 032001-1-13.
Rajiv Kumar Vashisht, Qingjin Peng (2021), Fractional Calculus-Based Energy Efficient Active Chatter Control of Milling Process Using Small Size Electromagnetic Actuators, ASME Journal of Vibration and Acoustics, February, Vol. 143 / 011005-1-14.
Rajiv Kumar Vashisht, Qingjin Peng (2021), Online chatter detection for milling operations using neural networks assisted by motor current signals of ball screw drives. ASME journal of Manufacturing Science and Engineering, Vol 143, 011008-1-15, DOI: 10.1115/1.4048001.
Rajiv Kumar Vashisht, Qingjin Peng (2020), Simultaneous Fault Detection and Multivariable Adaptive Hybrid Control for Unbalanced Vibrations of Cracked Flexible Rotor Systems, ASME Journal of Dynamic Systems, Measurement, and Control, December, Vol. 142 / 121001-1-16.
Rajiv Kumar Vashisht, Qingjin Peng (2020), Efficient active chatter mitigation for boring operation by electromagnetic actuator using optimal fractional order PDλ controller, Journal of Materials Processing Tech. 276, 116423, https://doi.org/10.1016/j.jmatprotec.2019.116423.
Jing Guo, Qingjin Peng, Liyan Zhang, Runhua Tan, Jianyu Zhang (2020), Estimation of product success potential using product value, International Journal of Production Research, https://doi.org/10.1080/00207543.2020.1788733.
Baosu Guo, Jingwen Hu, Fenghe Wu, Qingjin Peng (2020), Automatic Layout of 2D Free-Form Shapes Based on Geometric Similarity Feature Searching and Fuzzy Matching, Journal of Manufacturing Systems, 56, 37-49. https://doi.org/10.1016/j.jmsy.2020.04.019.
Rui Li, Qingjin Peng (2020), Surface quality improvement and support material reduction in 3D printed shell products based on efficient spectral clustering, International Journal of Advanced Manufacturing Technology. https://doi.org/10.1007/s00170-020-05299-6.
Yanlin Shi, Qingjin Peng (2020) A spectral clustering method to improve importance rating accuracy of customer requirements in QFD, International Journal of Advanced Manufacturing Technology. https://doi.org/10.1007/s00170-020-05204-1.
Qingjin Peng, Jie Yang, Trevor Strome, Erin Weldon, Alecs Chochinov (2020), Evaluation of physician in triage impact on overcrowding in emergency department using discrete-event simulation, Journal of Project Management, https://doi.org/10.5267/j.jpm.2020.8.002.
Qingjin Peng, Jie Yang, Trevor Strome, Erin Weldon, Alecs Chochinov (2020), Bottleneck Detection and Reduction Using Simulation Modeling to Reduce Overcrowding of Hospital Emergency Department, Journal of Modeling and Optimization, 12(2):100-109. https://doi.org/10.32732/jmo.2020.12.2.100.